Website Search

Search the Devitt website for more information

Positioning on your motorbike

The importance of positioning

Why is positioning so important and why is positioning for learners so dramatically different than that of an advanced rider?

Learning to ride on the road for the first time can be a daunting experience. Not only are you ‘coming to terms’ with the weird controls by using both hands, many fingers and both feet, there is also that little issue of balance of the bike.

To make matters worse the instructor then tries to explain the physics of counter-steer when cornering, which confuses everyone. Of course there is that other little matter of stopping, recognising different road surfaces, weight distribution at braking and which brake or combination of brakes should I be using anyway! Don’t seem to remember learning to drive a car being that difficult.

Add to that a feeling of being very vulnerable as other road users show no mercy, even if you are displaying ‘leave me alone’ L plates. It’s because of all these factors and the chances of you being repeatedly told by your instructor to cancel the indicators and remember PSLM, that for learner training and test purposes they keep you at harms way by getting you to adopt a position centre of your lane.

The video below from Total Advanced takes us through the positioning process while cornering.

Advanced Motorcycle Instructor's Cornering Commentary (Total Advanced Training)

Top tips:

Obviously, if there is a hazard, or developing hazard then move away, but the only latitude normally afforded is when entering a RH bend when you can move more to the left. The prospect of you going anywhere near the centre divide would attract criticism.

Whilst that totally makes sense for an inexperienced biker, once you find riding a bike has become ‘second nature’ your brain has capacity to take on new skills and a new system of riding and this is where many riders can benefit from additional training and the transition that lays ahead.

Whenever you take the transition from learner to post test/advanced, don’t ever lose sight of the principal that it should make you much safer and if any time you feel that isn’t the case, the chances are it’s been lost in translation as the system is very sound.

Positioning can seem quite alien to some riders…

When teaching riders advanced positioning techniques for the first time many describe this as being alien to them and not anything they would have considered themselves.

Many have adopted rigid lines perhaps from years of experience of driving a car where flexible positioning with a car is limited due to its width.

Also at the time of the learner training it would be very conflicting if they explained post test positioning as their job is to get you through the test. Motorcycles are fundamentally different to cars especially on size, which is why we can be far more flexible with positioning, which can both increase your safety margins and improve your view. Some riders will wrongly prioritise visibility above everything else, but it should never be implemented if it means sacrificing your safety.

So…

  • We can be more flexible with positioning on a bike than in a car
  • Positioning on a bike can increase your safety margins and improve your view
  • Do not sacrifice your safety when positioning

Related content

Off siding:

A good example of this is the practice of ‘off siding’, whilst going into a sharp left hand bend from over the crown of the road. Whilst the more you are to the right the more you can see into a left hand bend – it still has to be safe.

That means negating any threat from a RH blind entrance and should a car suddenly appear travelling towards you, that your closing distance allows you to get back to your side of the road safely.

As an examiner, riders on test who try to introduce this into their ride, get it more wrong than right. You have to always think ‘what is there an advantage that can be had from doing this manoeuvre’ against the risk.

The straight lining of some slight bends can be achieved in reasonable safety by an inexperienced rider whereas to correctly know when to use offsiding requires a greater ‘skill set’, as the risk can be potentially much greater.

The video below from Total Advanced demonstrates how visibility and safety can be incresed when off siding. 

Advanced Motorcycle Instructor demonstrating 'offsiding' on a training course

Not limited to bends:

Some experienced riders who have not completed any post test training may already introduce elements of flexibility with entry/exit lines into corners, but as hazards can appear from both sides of the road and at any time, this shouldn’t be limited to bends.

As riders we should try to maximise our position by making us visible to other road users at all times and because of this advanced riders are taught to ride more towards the centre of the road. That is on the basis there is no apparent hazard identified.

Some wrongly hold onto that position when traffic is passing in the opposite direction. Unless the road is that wide, or there is a divide, the opposing traffic is a hazard and you should move away. Tucking in an elbow isn’t moving away, as once again safety is everything.

So…

  • Hazards can appear from both sides of the road
  • Ride towards the centre of the road to maximise your position, improving visibility to other road users
  • Tuck back in properly once traffic is passing in the opposite direction

Blind entrance and junctions:

We know motorcyclists, are significantly at risk from vehicles pulling out of nearside junctions and entrances. With no apparent danger to the off side we should approach these blind entrance and junctions placing good distance between us and the mouth of the junction.

By adopting an advanced position we should already have achieved an increased safety margin. It’s not just about you looking into and controlling the junction it’s equally about you making yourself as big as possible to any vehicle considering pulling out.

Think ahead!

Don’t be a reactive rider, which is only moving away when a car appears. With no apparent danger to the offside, ride proactively anticipating a car may appear. Our perfect world can quickly be shattered, as even with a great approach line, headlight on, and wearing a hi vis jacket, the car can still pull out you.

By not now being centre of your lane, but centre of the road has doubled the distance between you and the bonnet. Usually the more time we have the better our decision making process can be. In those circumstances you have just bought yourself a lot more time and distance to negate the threat.

So, positioning…

  • Gives you a better view
  • Increases your safety margins
  • Maximizes your visibility to other road users
  • Provides you with more time to make a better informed decision

At the end of our training days we give riders written feedback in 12 areas of riding competency, with some areas being better developed than others. If I could get all riders to consistently ride in the correct position I would feel it was a good day at the office!

 

Mick Jones is the Chief Instructor for Total Advanced Training, a Bike Safe Assessor and a Rospa Motorcycle Examiner. He was a former Bike magazines resident expert for 4 years on their column ‘the riding clinic’ and ex Police Surveillance Motorcyclist in London.

To find out more information about Mick & Total Advanced why not visit the Total Advanced website, email info@totaladvanced.co.uk or phone 07813167749.

You can also follow Total Advanced on Twitter and Facebook.

 

3 comments on “Positioning on your motorbike”

robert cravensays:

Never go over to being near the kerb on a right hand bend as there may be danger there on the roads surface, water drains, pot holes, debris etc. always stay away from the crud that lands there. one can go round a bend easily and generally at the same speed but without that danger.

Never go over the central white lines onto the opposite side as a normal thing to do its no longer instructed in Advanced riding or in the Police Roadcraft Manual or by the IAM. or others as its been considered too dangerous for normal rider to persistently do that manoeuvre.

robert cravensays:

Unfortunate;y most danger to a motorcyclists is on bends, some 40% of kills happen there and on straights with inappropriate overtakes that takes a further 21% of deaths of motorcyclsts.

So that’s some 61% of kills out on country roads and if we are irresponsible then its not going to change. Country riding is a whole different state of mind and experience than town work. The dangers are not as transparent and are in many cases hidden from view. With the right attitude of mind and making the correct assumptions and presumptions we can enjoy the countryside and have a good safer ride.

The best advise on bends is think that every bend is a tightening one, That is one that as you go round following the curve looking for the apex the bend actually becomes tighter and then there is a need to slow and adjust to a different line at a slower speed or countersteer and lean the bike over more. So at the moment until more proficient forget countersteering. Its best and safest to to go into a bend slower in the first place so slow it down by say 5 mph or maybe 10 and then if it tightens up you may well be able to turn into it without any dangerous considerable effort or it doesn’t tighten up and you are quids in on the safety stakes,

Remember we are not police officers going to an incident quickly and therefore they need all the training that they can get which is considerable, We are civilians and our needs to get somewhere and therefore our attitude to riding for pleasure or commuting with safety and speed are different just make sure that the end result is getting home to loved ones without any increased danger caused by yourself or any other road user.

Rid safe.

robert cravensays:

I dont know when the video on off siding was made but it is now out of date and no longer taught in the Police Roadcraft Manual. The off siding in the latest manual makes no position on the offside or wrong side of the road. The furthers offside position is just the two thirds position nearer to the central white lines and as such riders learning Advanced Riding and Driving techniques are no longer required to learn how to ride on the wrong side of the roads. As i have mentioned before it might be considered necessary for speed and visual advantage by a police officer required to attend a scene of an of an incident but it is no longer trained as requirement for ordinary riders on our roads so please forget about off siding as meaning riding on the right hand side or wrong side of any road.

Leave a Comment

Your email address will not be published. Required fields are marked *

This site uses Akismet to reduce spam. Learn how your comment data is processed.

Exit mobile version